By filling up the Form TAIVER will give you detailed information about techinical info, commercial notes and all what you need to know.




Taiver takes part to the most important events in Italy and all over the world. Visit this section and discover when and where we are present.




If you need an Acrobat (PDF) viewer click here.


If you need an Flash player click here.

HTP 21000 BICOMPONENT is an airless hydraulic piston pump ideal for bi-component products with mixing 50:50.
It is the ideal equipment for injecting specific products for strengthening in the buildings renovation. The easy adjustment of the pressure allows to inject from low to high pressure (up to 100 Bar) without problems.

HTP 21000 BICOMPONENT in the version with 9 ltr/min delivery, besides injection, it is ideal for spraying bi-component products (mixing 50:50)

Ideal for injecting bi-component products for the water-barrage in the tunnel.
Construction specifications:
The electric motor is H class, that means: maximum quality and safety. It can work in very bad conditions and with very high temperature. An automatic system stops the pump when exceeding the electric safety limits. All parts in contact with the product are in stainless steel in order to grand the highest performance. HTP 21000 has been designed for an easy maintenance.
  #021400 - Delivery  9 lt./min.
  #021450 - Delivery 18 lt./min.
The airless system:
The Airless system allows a faster atomization and reduces the overspray, therefore a paint and solvent saving. Less overspray means also less pollution with benefits for the worker's health!


  Destination's field   Applications   Suggested guns
  Chemical barrel
  Bi-component for injection



Electric, singlephase


3 HP


230 Volt /50 Hz

  Max. Delivery: 9 lt./min    18 lt./min.
  Ratio: 1:1   1:1
  Max. Pressure: 200 Bar   120 Bar
  Weight: 100 Kg.   120 Kg.
HTP 21000 BI-MIX - 9 lt/min.pdf
HTP 21000 BI-MIX - 18 lt/min.pdf
Print this page
Send a request

  Copyright TAIVER S.r.l. 2007