Construction Pump: MTV 300

MTV 300 is a screw pump with a singlephase electric motor and direct pulley belt transmission with reducer. Speed is adjusted electronically.
In the industrial building field, MTV 300 is a pump with innovatory features which allows to spray prepared cements and whitenings, plastic coatings up to 3 mm. grain size.
MTV 300 is the ideal pump for spraying coatings on buildings, walls, etc, with very low costs and high working speed without effort.
MTV 300 has been designed to fill joints between visible stones, porphyry and general facework and consolidation injections.
After the machine is equipped with compressor, it is possible to spray both traditional and pre-mixed plasters, as well as finishing plasters (spray mist or orange peel effect). Being extremely compact, it allows one single operator to move very easily.
MTV 300 has an electrical board with inverter, enabling material flow adjustment on the gun.
As it can be totally disassembled, all its accessories can be efficiently cleaned


  1. light and easy to move
  2. hopper capacity: 40 l.
  3. hopper in galvanized steel
  4. rotor fast reverse motion
  5. built in accordance with latest EU rules
  6. flat and round spray tips
  7. speed electronic control unit


  • Filling
  • Injections
  • Pre-mixed water plasters
  • Fibrated wet plasters
  • Smoothing glues
  • Plaster-like finishing
  • Finishing products
  • Acoustic products
  • Paste products
  • Fireproof products
  • Waterproofing
  • Cement and plastic coatings



Loading height: 750 mm
Width: 500 mm
Length: 1100 mm
Weight: 85 kg


 new lance bear for dense material, electric contact-less switch (ref. 078600E)

New lance bear with electric contact-less switch has been projected to work with heavy duty materials, such as gypsum, plasters, cement and heavy duty coatings with max. granulometry 3 mm. It offers high performance and it is ideal for professional.

S.S. nozzles set for new lance bear

  • 078621 – S.S. nozzle ø 10 mm for new lance bear
  • 078622 – S.S. nozzle ø 8mm for new lance bear
  • 078623 – S.S. nozzle ø 6 mm for new lance bear
  • 078624 – S.S. nozzle ø 4 mm for new lance bear
  • 078625 – S.S. flat nozzle for new lance bear

 hoses set for MTV 300

  • 017801 – electric wire kit for remote control
  • 060500 – compressed air  hose kit ø 8 mm, length 10 m.
  • 060560 – paint hose kit ø 25 mm, length 10 m.

 stator and rotor set

  • 017121 – stator
  • 017120 – rotor