Taiver - Extrusion pumps

Pump for transferring & extrusion:

By filling up the Form TAIVER will give you detailed information about techinical info, commercial notes and all what you need to know.

Taiver takes part to the most important events in Italy and all over the world. Visit this section and discover when and where we are present.

If you need an Acrobat (PDF) viewer click here.

If you need an Flash player click here.

Two pneumatic pumps, built for the extrusion of very thick and not self-level products! Coupled with RAM they can extrude greases, silicones, very thick paste, etc...They are the ideal units in the automotive industry for sealing with silicones car-bodies, in the feed industry, shipyard, etc....

Performances:

EXT has a delivery of 10 lt/min and according to the air motor, it can be supplied with a ratio of 13:1 or 35:1. According to your needs, it is possible to combine the pumps with a 30 lt RAM for small drums or a 200 lt RAM for big drums. EXT is also ideal for extruding products, up to a viscosity of 100.000 centipoise.

Construction specifications:

EXT work with air motor, instant volumetric reversal, Taiver patented, without lubrication with no problems. The pump body is a spoon double chamber, which allows also the suction of very thick products, on request, the pump body can be supplied in the anti-acid version.

#050502 - EXT ratio 13:1

#026502 - EXT ratio 35:1

Destination's field

Applications

Ram

	Mechanical industry
	Building
	Industrial Body-work

	Paint
	Thixotropic products
	Latex
	Water based products
	Not abrasive paints
	Mastics
	Silicone
	Greases

Ram 30 ltr.

Ram 200 ltr.

Motor Type:	Pneumatic motor instant volumetric reversal
Ratio:	13:1 or 35:1


Weight:	24 Kg. - 28 g.

Max. Delivery:	10 lt/min

EXT - ratio 13:1 - exp. draw.pdf
EXT - ratio 35:1 - exp. draw.pdf

Print this page

Send a request

[ HOME | LEGAL INFO | SITE MAP | CONTACT US ]